Checking the electrical installation of your house is not only a matter of saving in possible breakdowns, but it is also about protecting our security. Having problems in the electrical wiring of the home can put our health at risk and, in many cases, we are not aware of the danger we run.
For this reason, in this post, we are going to give you a series of tips when it comes to checking that your home is out of danger and that the electrical installation is in perfect condition.
There are many times when a fire is caused by an electrical panel, a plug or a household appliance in poor condition. That is it is essential to Behe reason why careful to avoid trouble.
It is necessary to bear in mind that damage to the electrical installation is one of the leading causes of accidents in Spanish homes, and that 7.9% of the incidents are due to problems related to the electrical wiring.
This supposes a high risk of suffering electrocution or a fire, the same that we can prevent following a series of guidelines. For this, it is essential to take into account and be aware of the risks to which we can expose ourselves :
Any drop or rise in voltage becomes a danger if your electrical installation is not in good condition. If the cables of your home are handled without being done by a professional, the risk of damage increases.
It is essential to know if our home has the minimum security protections, without which, the percentage of danger increases considerably.
Let’s check to the heart of the matter. You will ask: How can we avoid risks in the electrical installation of the home? Well then we are going to give you a series of guidelines with which you will deduct the chances of suffering an incident:
- That a professional revise the electrical installation of your home. It may sound redundant, but it is fundamental. To ensure that everything works well in your home, or to know if something is not working correctly, it is necessary for a professional to check the entire electrical and wiring system every ten years or whenever you move to a new address.
- Make sure your installation meets the minimum requirements of a good connection. Here are several points to keep in mind:
Plugs must be more than one meter from faucets or any aspect of water intake.
Install security sockets if you need electricity in these areas.
Do not touch the electrical network with a wet floor.
At a minimum, the kitchen and bathroom must have a ground connection.
Do not install cables without approved connection plugs.
Use a differential to control the ups and downs of the energy input.
Avoid placing multiple sockets to avoid overloading the circuit.
- Use electrical appliances correctly. Keep in mind several tips:
Unplug Electrical Appliances After Use.
Do not place cables under carpets to prevent deterioration. Disconnects the most significant number of devices against adverse weather events to prevent possible failures.
Do not cover air intakes or clean the dryer with used fabrics. Place electric heaters away from curtains or furniture and never plug them.
It is not real science, but we are sure that, if you follow these tips and are more careful, you will significantly reduce the risk of dangerous incidents related to the electrical installation of the home.